Tattoo Heart Name Tag

Double-layer tag with name, inspired by traditional tattoo design.

1. Update name as needed.

2. Download SVG File

3. Cut backer from 1/8 acrylic

4. Cut heart, outline, and banner from 1/8 acrylic with 3M or comparable adhesive on the BACK of material.
   Banner middle piece has the name engraved on front of it - I recommend cutting from masked acrylic to make color-filling easy (I use craft acrylic paint - nothing fancy, just let it dry entirely before unmasking and clean up with a baby wipe).

5. Assemble by placing outline on backer, then placing inside pieces of heart and banner like a puzzle.

6. Optional: Use "Keychain Thingies® – Riley Black Designs" plastic hardware for attaching keyring - hole for hardware is sized based on their recommendations.

FILE KEY:
Black = Engrave
Red = Cut

Font In Sample: Tattoo on Creative Fabrica by SirinArt

FILE DIFFICULTY: Beginner - layered elements and color-filled engrave, but straight forward and minimal # of pieces.

Note: this is set up as a double layered design for everything except the hole for hardware. We only have that included on the back piece for the default because having it layered and equaling 1/4" is too thick to pair with the recommended keychain thingies - they won't close. If you only have it on one of the pieces, keeping it 1/8", it works great. Both versions of the outline and backer pieces (with and without hole) are included if you open the cuttle editor, so if you plan to use this with another type of hardware or ribbon and want that extra sturdiness, you can find it easily.

Colors used in sample are from CMB:

• Black gloss acrylic

• Red fabric shimmer acrylic

• White matte acrylic

Disclosure: Font link is an affiliate link.