10in Nutcracker Mosaic Sign File

Introducing our Nutcracker Mosaic Sign Design. There are a few options of how you can use this file.

1. Outline on Backer only

2. Outline on Backer w/ Colored Pieces - "Mosaic" style

3. Outline on Backer w/ some Colored pieces - "mix and match"

This version is scaled at 10" for window art, signs, or door hangers- if you want the 4" "ornament size" - click here!

Here's how to get started:

1. Input kerf adjustment if desired (if NOT adjusting or doing in Lightburn, leave at 0.00) - this will apply an offset to all pieces in the measurement entered, which helps with visible gaps. Because we use the backer layer, we don't need it to be pressure fit, but I still like to add 0.002 inch to my files.

2. Choose hole or no hole (for hanging)

3. Print desired elements

   • For outline only, apply 3M or comparable on back of outline piece material

   • For full mosaic, apply 3M or comparable on top of backer piece material

   • For Mosaic: if using an opaque backer, no light will shine through any of the front pieces. If using a translucent backer, you will be able to see through any translucent colors used in the mosaic.

4. Assemble. Always place outline first, aligning the edges for placement and then pressing down to secure. If adding inside pieces, follow design like a puzzle.

5. Add ribbon for hanging if applicable

IF SCALING AFTER DOWNLOADING - BE SURE TO "SELECT ALL" - KEYBOARD SHORTCUT "CTRL + A" OR "CMD + A" WILL SELECT ALL PIECES. I do not recommend cutting smaller than 4". Presized ornament option available here.

FILE KEY:
Red = Cut
Black = Engrave

DIFFICULTY LEVEL:
Outline only - BEGINNER (one layered piece)
Mosaic style - INTERMEDIATE/ADVANCED (some small pieces)

Pictured Below: Mosaic style, with hole added, in 4" and 6" sizes