The only parameters that need to be changed are Length, Width, and Depth. The Depth of a tray cannot be larger that half of the Width.

Documentation

The main parameters to key in are:

• Length

• Width

• Depth

  
  

• Depth is never more than half of the width

• There are parameters for design number, customer name, etc.

• Fill in the pertinent data, and you have a Outfold Tray built in inches.

• The file also contains a 4up layout component called 2022005B_LO.

• Thanks to @forresto for the math help

• Thanks to @forresto for the clip modifier

• Thanks to @forresto for the dashed modifiers

Updates

• 02-23-2022 - Made Public

  An Outfold Tray is pretty basic. It is glued on high speed gluers and shipped flat. Sometimes an outfold tray is used as the bottom and an infold tray as the top in a top / btm setup. An outfold is easier to load, and because it collapses inward, it is sometimes preferable having an infold on top. It creates a better friction fit.

• If you are someone who just wants to make a typical top and bottom tray, and glue it yourself, if you are using folding carton paperboard:

  • Increase the Length and Width dimensions by 0.125". This allows the top to telescope over the bottom.