Baseball Bow Ribbon Bag Tag
@LayeredPaperArt
This is a two layer bag tag. The name is cut out of different material, and glued to the baseball bow ribbon. I did not add any scoring for alignment.
Change the basic parameters Name and HoleDiameter. The HoleDiameter defaults to 0.19" diameter. The default template uses the Hilda Boby font, See parameter ChooseFont for other options.
The parameter XposName slides the Name left or right if it needs to be centered
The parameter YposName slides the Name up or down if it needs to be centered
The parameter Style allows you to select:
Score - score the baseball ribbon with a crosshatch pattern
Engrave - engrave the baseball ribbon
Font
The parameter ChooseFont allows you to switch to a font other than Hilda Boby.
Colors - Change colors if you need to.
If you choose the Score Style, you could score the ribbon on 1/16" Romark 2 ply acrylic from Johnson Plastics Plus and cut the name out colored acrylic
If you are using the Keychain Thingies Extra Strength 2.0 keychain connectors, be aware that they only work with 1/8" material. They recommend a 0.19" diameter hole, but I measured 0.177" diameter. It is best to measure for your laser.